top of page

POWER TROWEL RESURFACERS 

RIO-CLAD EPT is a three-component filled, 100% solids epoxy system for resurfacing eroded interior concrete floors. Topcoats (RIO-COAT EMP, RIO-COAT EPT and RIO-COAT UHW) are two-component, 100% solids epoxies for sealing the overlay.

 

Applications include repairing large eroded areas such as main traffic aisles, loading docks and other spaces subject to heavy traffic and abuse.

Grey color swatch of Rio-Coat Epoxy Mortar System
  • Safe to Use Around Solvent Sensitive Products such as Food, Beverages, Pharmaceuticals and Cosmetic products​

  • Less costly than concrete replacement or capping

  • Cleans easily, saving detergent, labor and water

  • No VOC (0 g/L). (Complies with SCAQMD VOC regulations. LEED credits available.)

Rio-Coat Epoxy Mortar System in an empty werehouse room
Rio-Coat Epoxy Mortar System in an empty factory room
EPT

RIOCOAT EHB (Epoxy Grout Coating) is a high solids epoxy coating that can be used for sealing a highly filled epoxy sand filled resurfacer. This high-gloss surface is easy to clean and provides excellent protection against wear and abrasions.

Grey color swatch of Rio-Coat Epoxy Mortar System
  • Excellent chemical and impact resistant

  • Stipple finish coating for slight non-skid

  • Topcoat for sand filled re-surfacer

  • Faster cure

Rio-Coat Epoxy Mortar System in an emty werehouse room
Rio-Coat Epoxy Mortar System in an empty werehouse room
EHB

RIO CLAD ETM is a three-component filled, 100% solids epoxy system for resurfacing eroded interior concrete floors. Topcoats (RIO-COAT EMP, RIO-COAT EHB and RIO-COAT UHW) are two-component, 100% solids epoxies & urethanes for sealing the overlay.
 

Applications include repairing large eroded areas such as main traffic aisles, loading docks and other spaces subject to heavy traffic and abuse.

Grey color swatch Rio-Coat Epoxy Mortar System
  • Safe to Use Around Solvent Sensitive Products such as Food, Beverages, Pharmaceuticals and Cosmetic products​

  • Less costly than concrete replacement or capping

  • Cleans easily, saving detergent, labor and water

  • No VOC (0 g/L). (Complies with SCAQMD VOC regulations. LEED credits available.)

Rio-Coat Epoxy Mortar System in an empty werehouse
Rio-Coat Epoxy Mortar System in an empty factory
ETM
RIO Polymer Flooring Systems

INDUSTRIAL POLYMER FLOORING 

1-888-278-2183
info@riofloor.com

Rio Flooring Systems made in the USA
  • LinkedIn
  • Facebook
  • Instagram
bottom of page